Series 2250 heavy disc harrow

More images:

FEATURES

  • Uniquely designed harrow is available in five rigid and four wing fold models. Harrows are ideally suited to give excellent uniform tillage results in all light plowing applications.
  • Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.
  • Hydraulically controlled transport assembly with cylinder transport locks to pin wheels in raised position to safeguard implement from accidentally falling during transport.
  • 10” (254mm) ground clearance with standard 28” (711mm) diameter disk blades.
  • Adjustable gang angles of 18°, 20°, and 22° for both front and rear gangs.
  • Up to 9” (229mm) maximum depth of penetration with standard 28” (711mm) diameter disk blades.
  • Equipped with Timken dual tapered oil bath roller bearings.
  • Standard bearing wear plates help protect the bearing housing from the wear caused by abrasive soils, extending their service life and decreasing cost.

11” (279mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered roller bearings.

Model

 

Number of Disks

 

Number of Bearings

 

Width of Cut

(m)

 

Transport Width

(m)

 

Suggested Engine Horsepower

(LE)

 

Weight/Disks

(kg)

 

Net Weight

(kg)

2250-29

2250-33

2250-37

2250-41

2250-45

2250-45-WF

2250-49-WF

2250-53-WF

2250-57-WF

29

33

37

41

45

45

49

53

57

8

12

12

12

12

16

16

16

16

3,8

4,3

4,8

5,3

5,8

5,8

6,4

6,9

7,7

4,2

4,6

5,2

5,7

6,3

4,1

4,1

4,1

4,1

181-217

207-243

248-284

258-292

281-344

281-344

307-343

329-365

354-390

118

117

116

115

108

114

113

112

111

3420

3862

4580

4724

4915

5103

5557

5962

6368

*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAES 290.1– Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for model 4250-35. Two rear tractor hydraulic circuits required for models 4250-49-WF and 4250-53-WF.

Standard Equipment:

  • 28” (711mm) diameter x 5/16” (8 mm) thick, cutout (notched) shallow concavity disk blades.
  • Heat treated alloy steel gang axles.
  • Heavy duty fabricated steelspools.
  • Heavy duty bearing wear plates.
  • Tapered gang assemblies.
  • Adjustable disk blade scrapers.
  • Wheel hubswith 2 tapered roller bearings on each hub that are dust and moisture protected.
  • Four dual 12L x 15 farm highway service tires for transporting, plowing, and turning.
  • Hardened pins and bushingson all pivot points.
  • Drawbar jack standand safety chain
  • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.

Optional Equipment:

  • 28” (711 mm) diameter x 5/16” (8mm) thick; cutout (notched) front and smooth (round) rear shallow concavity disk blades.
  • 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) front and rear shallow concavity disk blades.